
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-30B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 25 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-30B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that lets you dial the extend stop from 25 to 55 mm directly on the machine. The short riveted body saves valuable axial mounting depth where round-body or larger profile units will not fit.
This specific SKU includes a male M5x0.8 piston rod thread (option B) instead of the default female M3x0.5. End-of-stroke deceleration is handled by a fixed NBR bumper at each end, which absorbs shock but is not an adjustable air cushion. Note that this configuration ships without a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 25 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 25 to 55 mm to set precise probe contact depth on varying PCB heights without machining custom spacers.
Fit the short riveted body into tight assembly jigs and fine-tune the clamping reach to accommodate different material thicknesses.
Choose this unit when your fixture requires on-site stroke tuning between 25 and 55 mm via the M5x0.8 R screw.
Confirm your requirements for the M5x0.8 air port, the male M5x0.8 rod thread, and the 30 mm adjustment window. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centers—the piston drifts, and the fixed NBR bumper only decelerates near the end of travel. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the external M5x0.8 R screw shortens the extend end position by up to 30 mm, allowing you to set the stroke anywhere between 25 and 55 mm. The retract stroke remains full, and the screw acts as a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.