
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-40S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 15 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M5x0.8) screw, you can dial the forward end-position anywhere between 15 and 55 mm directly on your machine, eliminating the need for shims or part swaps.
This thin riveted-body design drastically reduces axial mounting depth, fitting easily into tight spaces where bulkier alternatives cannot. The unit includes a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 15 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for trial positioning on prototype fixtures where the exact extend point of 15 to 55 mm must be dialed in by hand without disassembling the machinery.
Fits easily into tight analytical equipment thanks to the short riveted body, while the built-in magnet enables electronic switches for precise end-of-stroke confirmation.
It is ideal for setups requiring frequent on-machine stroke tuning during changeovers. Remember that a plain cylinder does not hold its load if air pressure drops or the valve is centered—the piston will drift. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. This specific configuration includes the -S magnet for sensing and a female M3x0.5 rod-end thread, operating via an M5x0.8 port.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 140.7 N. The theoretical maximum push force is 21 kgf at 1.0 MPa.
The external R (M5x0.8) screw shortens the extend stroke by up to 40 mm, allowing you to set the forward stop anywhere between 15 and 55 mm. The included -S magnet works with AirTAC reed or electronic switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.