
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-50B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 5 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-50B is a compact double-acting double-rod cylinder featuring an external R (M5x0.8) adjuster screw. This mechanism lets you dial the extend end-position down from the 55mm maximum to as low as 5mm directly on your machine, avoiding shims or part swaps during changeovers.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male M5x0.8 piston rod thread (the -B option) and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-stroke deceleration is handled strictly by a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 5 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
The short riveted body fits tight multi-tool turrets, letting operators turn the M5x0.8 adjuster screw to match varying part heights during product swaps.
Use the 50 mm external adjustment window to probe optimal contact distances on test fixtures, then lock the male M5 rod end once the ideal geometry is found.
When sizing this 16mm bore, evaluate your force requirements bidirectionally. Stepping down to the SDAJ12 drops the 0.5 MPa push output to 56.5 N, whereas moving up to the SDAJ20 raises it to 157.1 N.
This model is tailored for setup-heavy lines needing frequent on-site stroke tuning between 5 and 55 mm. Confirm your required bore, stroke, 50mm adjustment window, M5x0.8 port, male M5 rod thread, and lack of magnet. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers; the bumper only decelerates the stroke end. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
The R (M5x0.8) screw shortens the extend stroke mechanically by up to 50 mm, yielding a usable 5-55 mm range without changing force. This SKU lacks the -S magnet, so it cannot use reed or electronic switches. The fixed NBR bumper only decelerates the stroke end; it is not a lock, so you need an external rod lock or pilot-operated check valve to hold loads on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.