
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-75S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 0 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X55-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the extend position from 0 to 55 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This unit includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, and relies on a fixed NBR bumper at each end to decelerate the stroke.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X55-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 55 mm |
| Adjustable range | 0 – 55 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 0-55 mm extend stop during prototype runs.
Adjust the mechanical stop on-site when switching product widths on a packaging line. The short riveted body fits tight transfer gaps, and the fixed NBR bumper absorbs end shock.
Use the built-in magnet with an electronic switch to confirm extend position, and add an external check valve to prevent drift on air loss.
When sizing this 16 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this model if your application requires frequent on-site stroke tuning across a 0 to 55 mm window. Confirm your porting matches the bore-fixed M5x0.8 air connection, the rod end thread (female M3x0.5 or male M5x0.8), and that the -S magnet is present for your sensing needs. Remember that a plain cylinder does not hold a load on air loss or valve centring; the fixed NBR bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
It operates at 0.15-1.0 MPa, runs at 30-500 mm/s, and tolerates temperatures from -20 to +70 C.
The M5x0.8 R screw shortens the extend stop by up to 75 mm, yielding a usable extend range of 0-55 mm. It sets the mechanical stop without changing the output force. The included -S magnet works with AirTAC reed or electronic solid-state switches for position sensing, while a fixed NBR bumper decelerates the stroke end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.