
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 40 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-20B is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw. This mechanism lets you dial the extend stop down from the 60mm maximum to any position between 40 and 60mm directly on the machine, eliminating the need for shims or part swaps during fine-tuning.
The short riveted body saves valuable axial mounting depth where round-body or profile cylinders cannot fit. This specific SKU includes a male M5x0.8 piston rod end (instead of the default female M3x0.5) and operates at 30-500mm/s. End shock is handled by a fixed NBR bumper that decelerates the stroke, which is not an adjustable air cushion. Note that this unit lacks a piston magnet and cannot accept sensing switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 40 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke window on-site to fine-tune product deflection angles during line changeovers, relying on the fixed NBR bumper to absorb end impacts.
Fit the short riveted body into tight assembly stations and use the male M5x0.8 rod to secure custom clamps that hold a 5.1kg vertical load safely.
Choose this configuration if your fixture requires on-site stroke tuning across a 40-60mm window. Confirm your setup needs the male M5x0.8 rod thread (-B), the M5x0.8 air port, and the 60mm stroke. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper and mechanical stop do not lock the load. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical max push is 21kgf at 1.0MPa. Operating pressure is 0.15-1.0MPa, proof pressure is 1.5MPa, and temperature ranges from -20 to +70C.
The M5x0.8 R screw mechanically shortens the extend stroke from the 60mm maximum down to 40mm without changing the force output. This specific SKU lacks a piston magnet, so it cannot take magnetic switches; you would need the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.