
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-30B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-30B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke down from the 60mm maximum to as low as 30mm directly on the machine, eliminating the need for shims or part swaps during setup.
This 16mm bore unit features a short riveted body that saves axial mounting depth where a larger profile cylinder will not fit. It uses a fixed NBR bumper at the ends to decelerate impact rather than an adjustable air cushion. This specific SKU includes a male M5x0.8 piston rod thread and ships without a piston magnet, meaning it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-30B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 30 and 60mm to hit exact probe depths on machined parts without machining new spacers for every batch.
Fits into tight riveted-body spaces to clamp delicate workpieces, adjusting the outward clamp position on the fly to prevent over-travel damage.
Stepping down to an SDAJ12 yields only 56.5 N, which risks stalling, whereas stepping up to an SDAJ20 provides 157.1 N for heavier payloads.
Choose this configuration if your fixture requires frequent on-site stroke tuning between 30 and 60mm. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For suspended or vertical loads, integrate an external rod lock or pilot-operated check valve. Confirm your specs: 16mm bore, 60mm stroke, 30mm window, M5x0.8 port, male M5x0.8 rod thread, and no magnet.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa, tolerates proof pressures up to 1.5 MPa, and runs at speeds of 30-500 mm/s.
Turning the R (M5x0.8) screw mechanically shortens the extend end-position by up to 30mm, giving a usable outward range of 30 to 60mm. The screw sets the stop only; it does not alter force or lock the piston mid-stroke. Without live air pressure, the cylinder cannot hold its load and will drift.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.