
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-30S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-30S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop anywhere between 30 and 60 mm. The short riveted body drastically cuts axial mounting depth where a larger profile unit will not fit.
This unit includes a built-in piston magnet for AirTAC reed or electronic solid-state switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 30 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 30 to 60 mm during prototype runs to find the exact contact point for delicate 5.1 kg vertical lifts without machining new spacers.
Leverage the built-in magnet and reed or electronic switches to confirm exact extend endpoints while fine-tuning test probe contact depth.
Choose this specific unit when a machine requires frequent on-site stroke tuning without part swaps.
Verify the 60 mm maximum stroke, 30 mm adjustment window, and M5x0.8 port. This variant carries the -S magnet for sensing and a female M3x0.5 rod-end thread. Remember that the fixed NBR bumper only decelerates the stroke end; a plain cylinder drifts on air loss, so fit an external rod lock or pilot-operated check valve if you need true load holding.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw shortens the extend stop by up to 30 mm, giving a usable extend range of 30 to 60 mm. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.