
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-40B is a compact double-acting double-rod cylinder featuring an external extend stop. A front M5x0.8 adjuster screw lets you dial the forward end-position anywhere between 20 and 60 mm directly on the machine, eliminating shims.
Its riveted body minimizes axial footprint where space is tight, while a fixed NBR bumper decelerates the stroke end. This specific SKU includes a male M5x0.8 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 20 and 60 mm to set precise contact depth for electronic testing probes without machining new spacers.
Tune the male rod tip position on the fly during product changeover to safely push 5.1 kg assemblies out of a tight fixture.
Use the 40 mm adjustment window to iterate clamp locations quickly during new machine commissioning before finalizing hard stops.
Choose this 60 mm stroke with a 40 mm window if your fixture requires frequent trial positioning or rapid changeover.
Confirm the 16 mm bore, 60 mm stroke, 40 mm adjust window, and M5x0.8 port suit your pneumatics. Note the male M5x0.8 rod thread for your mounting interface. Remember that a plain cylinder drifts when air is lost or valves centre; the fixed bumper only decelerates near the end and the adjuster is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the M5x0.8 adjuster screw shortens the forward stroke by up to 40 mm, giving a usable extend range of 20 to 60 mm. This sets a mechanical stop and does not alter force. It is not a mid-stroke lock, and the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.