verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SDAJ Series · Adjustable-Stroke Compact Cylinder

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S

The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.

  • BoreØ16 mm
  • Max stroke60 mm
  • Adjustable range20–60 mm
  • Adjuster threadM5×0.8
  • Port sizeM5×0.8
  • CushionFixed NBR bumper (both ends)
$44.16 $51.66Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SDAJ16 stroke, mounting and version on one page All SDAJ16 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S

The AirTAC SDAJ16X60-40S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A front R (M5x0.8) screw lets you dial the forward end-position anywhere between 20 and 60 mm directly on the machine, eliminating the need for shims or part swaps.

Its short riveted body drastically saves axial mounting depth where a round-body or profile cylinder will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S Technical Specifications

ModelAirtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S
SeriesSDAJ compact adjustable-stroke cylinder
Bore sizeØ16 mm
Max stroke60 mm
Adjustable range20 – 60 mm
Adjuster thread (R)M5×0.8
Port sizeM5×0.8
Acting typeDouble acting
Rod end threadM3×0.5 F / M5×0.8 male (B)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed NBR bumper (both ends)

The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.

Theoretical Output Force (Ø16mm)

PressurePush forcePull force
0.5 MPa86 N86 N
0.7 MPa121 N—
Max (@1.0 MPa)18 kgf

SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.

Model Code: Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S

SDAJCompact double-acting cylinder with adjustable stroke.
16Bore size in mm.
×60Maximum stroke length in mm.
-40Adjustable window (10/20/30/40/50/75/100 mm).
S / BS = magnet; B = male-thread rod (both optional).

Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).

Where the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S Is Used

precision_manufacturing

Probe Positioning

Dial the extend stop from 20 to 60 mm to hit exact sensor contact depths on varying circuit board test fixtures without machining new spacers.

sync_alt

Changeover Stops

Quickly retune the forward travel during product family changeovers on a packaging line, accommodating different carton depths on the fly.

science

Trial Clamping

Safely set delicate clamping positions during lab automation setup by limiting the mechanical stop to prevent crushing fragile samples.

Is the Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S the Right Cylinder?

Choose this specific model if your fixture requires frequent on-site stroke tuning during changeovers. Verify your parameters: 16 mm bore, 60 mm max stroke, 40 mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet option. Remember that a plain cylinder does not hold a load on air loss; add an external rod lock or pilot-operated check valve if position holding is required.

AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Target position within 20–60 mm
  • ✓ Force at your working pressure
  • ✓ Access to reach the R adjuster
  • ✓ Magnet (S) for sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Lock the M5×0.8 adjuster after setting the stroke.
  • check Avoid side load on the piston rod.
  • check Front/rear covers are riveted — do not dismantle.
  • check Installation by qualified personnel per AirTAC docs.

Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S FAQ

The theoretical maximum push is 21 kgf at 1.0 MPa.

The M5x0.8 R screw mechanically shortens the extend stroke by up to 40 mm, yielding a usable 20-60 mm range. The -S option provides a built-in piston magnet for AirTAC reed or electronic switches.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SDAJ Cylinders

Request a Quote for Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SDAJ16X60-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.