
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-50 is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop anywhere between 10 and 60 mm. This on-machine tuning eliminates shims and part swaps during frequent format changes.
Built with a short riveted body, this unit saves axial mounting depth where a larger profile cylinder will not fit. It uses a fixed NBR bumper at each end to decelerate the stroke, which is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the 6 mm piston rod utilizes a female M3x0.5 thread.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 10 and 60 mm to find the exact contact point for prototype parts without machining new spacers.
Set precise 10-60 mm extension limits for repetitive testing probes where a short riveted body is required to fit tight rigs.
Choose this specific model if your fixture requires on-site extend tuning across a 10-60 mm window.
Confirm the 60 mm maximum stroke, 50 mm adjustment window, and M5x0.8 air port suit your pneumatic layout. Note that this SKU lacks a piston magnet, so it cannot accept reed or electronic switches; specify the -S option if sensing is required. Furthermore, a plain cylinder does not hold position on air loss or valve centering—the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a proof pressure of 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the M5x0.8 R screw shortens the extend stop by up to 50 mm, allowing usable strokes from 10 to 60 mm. The screw acts purely as a mechanical stop and does not alter force. It is not a lock; the cylinder cannot hold a load on air loss, so use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.