
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-50B is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the forward stroke anywhere between 10 and 60 mm directly on the machine.
This variant uses a male M5x0.8 piston rod thread and a short riveted body to minimize axial mounting depth. End-of-travel shock is handled by a fixed NBR bumper, not an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the male M5 rod stroke on the fly for different carton widths on a packaging line, ensuring precise routing without changing cylinder hardware.
Fine-tune the extend position for delicate test probes in tight lab enclosures where the compact riveted body saves critical axial space.
Choose the 16 mm bore when the smaller unit lacks force but the 20 mm body is too bulky.
The 50 mm adjustment window is perfect for trial positioning and frequent changeovers. Keep in mind the fixed NBR bumper only decelerates the stroke end; it is not a brake. If you need to hold a load vertically during air loss or valve centering, add an external rod lock or pilot-operated check valve. Confirm your requirements for the M5x0.8 port, 10-60 mm adjust range, and male M5 rod thread before ordering.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
Turning the R (M5x0.8) screw mechanically shortens the forward stroke by up to 50 mm, allowing an extend range of 10 to 60 mm. The retract remains full stroke. This SKU lacks a magnet for switches; you need the -S option for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.