
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 10 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X60-50S is a compact double-acting double-rod cylinder featuring an external M5x0.8 adjuster screw that dials the extend stop anywhere between 10 and 60 mm. The short riveted body drastically reduces axial mounting depth, fitting into tight spaces where alternative body styles fail.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. End-of-stroke deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s, and the M5x0.8 air port ensures straightforward pneumatic integration.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X60-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 60 mm |
| Adjustable range | 10 – 60 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 10 to 60 mm extend stop during prototype runs.
Adapt short-stroke pick-and-place arms to new part heights instantly. Turn the M5x0.8 adjuster screw on the machine to reposition the rod without changing hardware.
Fit the compact riveted body into tight electronics assembly cells. The integrated magnet enables electronic switches for precise end-of-stroke confirmation.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 50 mm window without swapping components.
Confirm the 16 mm bore, 60 mm maximum stroke, 50 mm adjustability window, M5x0.8 port, female M3x0.5 rod-end thread, and the integrated magnet for switch sensing. Remember that a plain compact cylinder does not hold position upon air loss; the fixed bumper only decelerates near the end of travel. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 140.7 N and pull to 121 N. The theoretical maximum push is 21 kgf at 1.0 MPa.
The external M5x0.8 screw shortens the extend stroke by up to 50 mm, yielding a usable 10 to 60 mm range. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing. The adjuster sets a mechanical stop and does not alter force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.