
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X65-10 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 55 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X65-10 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke down by 10 mm, yielding a usable 55 to 65 mm forward travel directly on the machine.
This configuration provides a 65 mm stroke, which exceeds the 60 mm standard maximum for this bore size, making it a non-standard made-to-order item. The short riveted body conserves axial mounting depth where round-body or profile variants will not fit. End shock is managed strictly by a fixed NBR bumper, meaning there is no adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X65-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 65 mm |
| Adjustable range | 55 – 65 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 55-65 mm extend stop during initial commissioning to find the exact contact point for delicate probes without machining new spacers.
Fine-tune the end-of-travel position for test fixtures where a 5.1 kg vertical lift capacity is sufficient and space is highly restricted.
When sizing this unit, evaluate both neighbouring bores. Choose this specific model if your fixture requires on-site stroke tuning to perfect a gripping or pressing distance.
Confirm the 16 mm bore, 65 mm stroke, 10 mm adjust window, and M5x0.8 port match your pneumatic layout. This SKU lacks the -S magnet, so it cannot accept reed or electronic switches. Remember that a plain cylinder does not hold a load when air is lost or the valve is centred; integrate an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
Turning the M5x0.8 R screw shortens the extend end position by up to 10 mm, giving a usable forward travel of 55 to 65 mm. It acts purely as a mechanical stop and does not alter the output force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.