
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X65-20 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 45 to 65 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X65-20 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke down by 20 mm on-site, yielding a usable extend range of 45 to 65 mm without swapping shims or parts.
This unit carries a 65 mm stroke, which exceeds the 60 mm maximum standard stroke for a 16 mm bore, making it a non-standard made-to-order item. The short riveted body minimizes axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X65-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 65 mm |
| Adjustable range | 45 – 65 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M5 screw to find the exact 45-65 mm extend point during prototype tooling setup before locking down the final stop.
Quickly alter the extend endpoint on packaging machines running mixed product sizes without disassembling the cylinder.
Choose this specific model if your fixture requires exact on-machine extend tuning between 45 and 65 mm.
Confirm the 16 mm bore, 65 mm non-standard stroke, 20 mm adjust window, and M5x0.8 air port. This SKU lacks the -S magnet, so it cannot accept AirTAC reed or electronic switches. Note that a plain cylinder does not hold its load if air pressure drops or the valve centers; the fixed bumper only decelerates near the end of travel and is not a lock. For secure load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
At 0.7 MPa the push is 140.7 N and pull is 121 N. The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 screw mechanically shortens the extend stroke by up to 20 mm, allowing endpoints between 45 and 65 mm. It does not alter force, and the cylinder will not hold a load on air loss; use an external rod lock for holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.