
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X70-20S is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 50 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X70-20S is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the outward stroke anywhere between 50 and 70 mm directly on the machine, avoiding part swaps during setup.
Its short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. The 70 mm stroke is a non-standard made-to-order length for this 16 mm bore, extending past the 60 mm standard maximum. A fixed NBR bumper decelerates the stroke end, while the -S suffix provides a built-in piston magnet for AirTAC reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X70-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 70 mm |
| Adjustable range | 50 – 70 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 50 to 70 mm to find the exact contact point on prototype jigs without machining new spacers.
Set precise end positions for repetitive testing routines, relying on the fixed NBR bumper to absorb the 5.1 kg vertical load impact.
When sizing this 16 mm bore, evaluate both neighbors. Dropping to an SDAJ12 cuts the 0.5 MPa push force to 56.5 N, whereas stepping up to an SDAJ20 raises it to 157.1 N.
Choose this model when you need on-site stroke tuning for trial positioning. Confirm your parameters: 16 mm bore, 70 mm maximum stroke, 20 mm adjust window, M5x0.8 port, female M3x0.5 rod thread, and the -S magnet. Note that a plain cylinder does not hold a load on air loss or valve centering; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The theoretical maximum push is 21 kgf at 1.0 MPa.
The M5x0.8 R screw shortens the extend stop by up to 20 mm, giving a usable outward range of 50 to 70 mm. The -S suffix adds a built-in piston magnet for AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.