
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X70-40 is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 30 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ16X70-40 is a compact double-acting double-rod cylinder featuring an external extend stop. An M5x0.8 adjuster screw lets you dial the extend position anywhere between 30 and 70 mm directly on the machine, eliminating the need for shims or part swaps.
This 16 mm bore unit utilizes a short riveted body to minimize axial mounting depth where round-body or profile cylinders will not fit. The stroke length of 70 mm exceeds the 60 mm standard maximum for this bore, making it a non-standard made-to-order item. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Note that this specific SKU lacks a piston magnet and therefore cannot support sensing switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X70-40 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 70 mm |
| Adjustable range | 30 – 70 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Ideal for prototype assembly stations where the exact extend point of a 60 N clamping force must be dialed in precisely between 30 and 70 mm without machining new spacers.
Suits packaging lines with rapid format changeovers, allowing operators to quickly reposition a diverter arm on a 16 mm bore actuator to handle varying carton widths.
Useful in laboratory test rigs where a 5.1 kg vertical lift requires fine-tuning the extend stop on-site to probe different sensor activation distances.
Choose this model if your fixture requires frequent on-site stroke tuning across a 30-70 mm window.
Confirm the 16 mm bore, 70 mm maximum stroke, 40 mm adjust window, M5x0.8 port, and female M3x0.5 rod-end thread suit your mounting envelope. This SKU ships without a magnet; if you require position feedback via reed or electronic switches, specify the -S option. Remember that a plain cylinder does not hold a load on air loss or valve centering—the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
Turning the M5x0.8 adjuster screw shortens the extend stroke by up to 40 mm, giving a usable range of 30 to 70 mm. This specific SKU has no piston magnet and cannot take a switch; you must select the -S magnet option for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.