
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X80-20B is a genuine double-acting COMPACT cylinder (Ø16mm bore) whose extend end-position is set by an external M5×0.8 adjustment screw. You can dial the stroke anywhere from 60 to 80 mm on the machine — no shims, no part change.
The SDAJ16X80-20B is a compact double-acting double-rod cylinder featuring an external M5x0.8 R screw that dials the extend stop from 60 to 80 mm directly on your machine. This specific 80 mm unit is a non-standard made-to-order stroke, exceeding the 60 mm maximum standard travel for a 16 mm bore.
Its short riveted body drastically cuts axial mounting depth where round-body or profile units will not fit. The unit arrives with a male M5x0.8 piston rod (-B option) instead of the default female thread, and deceleration is handled strictly by a fixed NBR bumper at each end. Note that this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ16X80-20B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø16 mm |
| Max stroke | 80 mm |
| Adjustable range | 60 – 80 mm |
| Adjuster thread (R) | M5×0.8 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M3×0.5 F / M5×0.8 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 86 N | 86 N |
| 0.7 MPa | 121 N | — |
| Max (@1.0 MPa) | 18 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 16 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the actuation length on a packaging line diverter to accommodate varying carton widths, using the fixed NBR bumper to absorb the end shock.
Iterate on the exact extend position for a 5.1 kg vertical lift trial, turning the external M5x0.8 screw to find the optimal operating point.
Choose this specific configuration when you require on-site extend tuning between 60 and 80 mm alongside a male M5x0.8 rod end.
Confirm your requirements for the non-standard 80 mm stroke, the 20 mm adjustment window, and the M5x0.8 air port. A plain cylinder does not hold its load on air loss or valve centring—the piston drifts and the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ16 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj16-adjustable-cylinder
Quick checklist
The M5x0.8 R screw shortens the extend stop by up to 20 mm, giving a usable range of 60 to 80 mm. It is a mechanical stop, not a mid-stroke lock; the cylinder cannot hold a load if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.