
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-10B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 10 to 20 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X20-10B is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop directly on your machine. You can set the forward end-position anywhere from 10 to 20 mm without swapping shims or parts, while the retract stroke remains full.
Built with a short riveted body, this unit saves axial mounting depth where round-body or profile cylinders will not fit. It carries a fixed NBR bumper at each end to decelerate the stroke, though it is not an adjustable air cushion. This specific SKU includes a male-thread M6x1.0 piston rod and ships without a piston magnet, meaning it cannot host reed or electronic switches unless upgraded to an -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X20-10B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 20 mm |
| Adjustable range | 10 – 20 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×20 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Perfect for prototype tooling where the exact 10 to 20 mm extend point must be dialed in by hand during initial commissioning rather than machining new spacers.
Ideal for packaging lines running mixed carton sizes, letting operators turn the M6x1.0 screw to shorten the 20 mm stroke and adapt to different flap heights quickly.
Fits into tight axial spaces using its short riveted body to drive an 8 kg vertical press load, relying on the fixed NBR bumper to absorb the end shock.
Choose this model if your fixture requires on-site stroke tuning to perfect a trial position.
Confirm the 20 mm bore, 20 mm maximum stroke, 10 mm adjustment window, and M5x0.8 air port. The male M6x1.0 rod (-B) suits external threading needs, but avoid side loading. Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred; the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M6x1.0 screw shortens the extend stop by up to 10 mm, giving a usable forward range of 10 to 20 mm. It functions only as a mechanical end stop, not a mid-stroke lock, so the piston drifts if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.