
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 15 to 45 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X45-30 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 15 and 45 mm directly on the machine, avoiding part swaps during setup.
Its short riveted body drastically cuts axial mounting depth where round-body units will not fit. End-of-travel deceleration is handled by a fixed NBR bumper rather than an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X45-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 45 mm |
| Adjustable range | 15 – 45 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×45 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly for different carton depths, using the fixed NBR bumper to absorb the 30-500 mm/s approach impact.
When sizing this 20 mm bore, look at both neighbours.
Choose this model if your fixture requires frequent on-site stroke tuning across a 15-45 mm window. Confirm your porting matches the bore-fixed M5x0.8 thread and that you have a female M4x0.7 rod end. Remember that a plain cylinder drifts when air is lost or the valve centers; the fixed bumper only softens the end impact and does not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the R (M6x1.0) screw shortens the extend stop from the 45 mm maximum down to 15 mm. This screw acts only as a mechanical stop and does not alter force or lock the piston mid-stroke. Because this SKU lacks the -S magnet, it cannot be used with reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.