
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-20 is a compact double-acting double-rod cylinder featuring an external extend stop. An M6x1.0 adjuster screw lets you dial the extend position anywhere between 30 and 50 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains at the full 50 mm.
The short riveted body drastically reduces axial mounting depth where round-body or larger profile units will not fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-20 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 30 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact extend stop between 30 and 50 mm during prototype runs.
Adjust the stroke on-site to accommodate different product widths on a packaging line. The compact riveted body fits into tight transfer gaps where space is restricted.
Turn the M6x1.0 screw to set precise upper travel limits without needing to swap out the entire actuator.
When sizing this 20 mm bore actuator, evaluate your force requirements bidirectionally. Choose this specific model if your fixture setup demands frequent, on-site stroke tuning within the 30 to 50 mm window.
Confirm the 20 mm bore, 50 mm maximum stroke, 20 mm adjustment window, and M5x0.8 air port suit your manifold. This SKU lacks the -S magnet, so it cannot accept AirTAC reed or electronic switches; specify the -S variant if sensing is required. Furthermore, a plain cylinder does not hold position or load upon air loss or valve centring. The fixed bumper only decelerates near the stroke end and the R screw is a mechanical stop, not a lock. For secure load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 219.9 N and pull to 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
Turning the external M6x1.0 R screw shortens the extend stroke by up to 20 mm, allowing usable travel from 30 to 50 mm. This mechanism acts purely as a mechanical stop and does not alter force. The cylinder cannot hold a load on air loss; use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.