
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-30 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-30 is a compact double-acting cylinder featuring an on-site adjustable extend stop. An external M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 20 and 50 mm without changing parts.
Its riveted body minimizes axial footprint where space is tight. End-of-travel deceleration relies on a fixed NBR bumper, not an adjustable air cushion. Note this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-30 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6 screw to find the exact 20-50 mm extend point during prototype runs before locking down the final stop.
Adjust the extend depth on-site for different part heights on a packaging line, saving the downtime of swapping cylinders.
When sizing this 20 mm bore unit, consider the neighboring options.
Choose this model if your fixture demands on-site stroke tuning between 20 and 50 mm. It uses an M5x0.8 port and a female M4x0.7 rod thread. Remember that a plain cylinder drifts when air is lost; add an external rod lock or pilot-operated check valve if you must hold a load without live pressure.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The theoretical maximum is 32 kgf at 1.0 MPa.
The external R (M6x1.0) screw mechanically shortens the extend stroke down to 20 mm from the 50 mm maximum. It sets the hard stop without affecting force, and the fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.