
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 50 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X50-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the outward stroke anywhere between 20 and 50 mm directly on the machine, eliminating the need for shims or part swaps.
This model includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic switches along the body grooves. The short riveted body drastically reduces axial mounting depth where space is tight. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. With an 8 mm rod and an M5x0.8 port, this unit operates efficiently between 30 and 500 mm/s.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X50-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 50 mm |
| Adjustable range | 20 – 50 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×50 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 50 mm via the M6x1.0 screw to accommodate varying part heights during production line changeovers without swapping hardware.
Use the adjustable mechanical stop to safely probe optimal seating distances in test fixtures, locking the final coordinates once the ideal 8 kg vertical lift is confirmed.
Choose this specific unit when you need on-site stroke tuning during frequent changeovers, but remember that a plain cylinder does not hold position on air loss or valve centering. For load holding without live pressure, integrate an external rod lock or pilot-operated check valve. This configuration includes the S magnet option and a female M4x0.7 rod-end thread.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 219.9 N. The theoretical maximum push force is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend end-position by up to 30 mm, yielding a usable 20-50 mm range. It functions strictly as a mechanical stop and does not alter force or lock the piston mid-stroke. The built-in magnet supports reed or electronic switches for end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.