
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 45 to 55 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X55-10 is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop precisely between 45 and 55 mm.
Its short riveted body drastically reduces axial mounting depth, fitting easily where round-body alternatives cannot. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston without requiring adjustment. Note that this specific SKU lacks a piston magnet, so it cannot host reed or electronic switches; adding the -S option enables sensing capabilities.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X55-10 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 55 mm |
| Adjustable range | 45 – 55 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×55 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 45 to 55 mm on the fly to match different jig heights during production line setups.
Fine-tune the push distance for varied carton dimensions without swapping out the entire actuator assembly.
Iterate the extend endpoint in millimeter increments during prototype testing to find the exact contact point.
This model is ideal for operators needing on-site stroke tuning during frequent tooling changeovers. Confirm your requirements for the 20 mm bore, 55 mm maximum stroke, 10 mm window, and M5x0.8 port. Remember that a plain cylinder does not hold position on air loss or valve centering; for suspended loads, integrate an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
Turning the external M6x1.0 screw shortens the extend stroke by up to 10 mm, setting the stop anywhere between 45 and 55 mm. This mechanism is strictly a mechanical stop, not a mid-stroke lock; the cylinder will drift if air pressure is lost.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.