
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-40B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-40B is a compact double-acting double-rod cylinder built for applications requiring exact extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 20 and 60 mm directly on the machine, eliminating the need for shims or part swaps.
This variant features a male M6x1.0 piston rod thread and a short riveted body that saves valuable axial mounting depth. The unit relies on a fixed NBR bumper to decelerate at the stroke ends rather than an adjustable air cushion. Note that this specific SKU lacks a piston magnet, so it cannot support reed or electronic sensing without upgrading to the -S option.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-40B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Rapidly retune the stroke length on-site for varying carton sizes, using the male M6x1.0 rod to mount diverters while maintaining a safe 94 N working load.
Achieve precise trial positioning in tight enclosures where the compact riveted body saves axial depth, adjusting the extend endpoint on the fly without changing hardware.
Confirm your requirements for the 60 mm maximum stroke, 40 mm adjustment window, M5x0.8 port, and male M6x1.0 rod thread.
Remember that a plain SDAJ does not hold position or carry a load if air pressure drops or the valve centers. The piston will drift, and the fixed NBR bumper only decelerates near the end of travel—it is not a locking brake. To suspend loads safely without live pressure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
Turning the external R (M6x1.0) screw shortens the extend stroke by up to 40 mm, allowing you to set the forward stop anywhere between 20 and 60 mm. This SKU includes a male M6x1.0 piston rod and lacks a piston magnet, so it cannot use reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.