
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-40S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 20 to 60 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X60-40S is a compact double-acting double-rod cylinder featuring an on-site extend stop. A side-mounted M6x1.0 adjuster screw lets you dial the outward stroke anywhere from 20 to 60 mm without changing parts.
This thin riveted-body design saves valuable axial mounting depth where round-body units will not fit. The unit includes a fixed NBR bumper at each end to absorb end-of-travel shock, and the built-in piston magnet supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X60-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 60 mm |
| Adjustable range | 20 – 60 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×60 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 20 to 60 mm via the M6x1.0 screw to accommodate varying jig heights on a machining line without machining new spacers.
Fine-tune the outward reach during prototype assembly to find the exact 94 N contact force before locking down the mechanical stop.
Stepping down to SDAJ16 yields 100.5 N, while moving up to SDAJ25 provides 245.4 N. Choose this specific 40 mm window model if your fixture requires frequent changeovers or trial positioning within that 20 to 60 mm span.
Confirm the 20 mm bore, 60 mm maximum stroke, and 40 mm adjustability window suit your envelope. The air port is M5x0.8, and the rod end features a female M4x0.7 thread. The -S suffix indicates a built-in magnet for electronic or reed sensing. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates the stroke end rather than locking the load. Use an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend stroke by up to 40 mm, giving a usable range of 20 to 60 mm. The included -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.