
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 65 mm on the machine — no shims, no part change.
The SDAJ20X65-30S is a compact double-acting double-rod cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 35 to 65 mm directly on your machine.
Its short riveted body drastically reduces axial mounting depth where a round-body or profile cylinder will not fit. The integrated -S piston magnet supports AirTAC reed or electronic switches for precise position sensing, while a fixed NBR bumper decelerates the stroke end without acting as a lock.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X65-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 65 mm |
| Adjustable range | 35 – 65 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×65 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 35 and 65 mm to find the exact contact point for prototype parts without fabricating new spacers.
Set a precise mechanical end for an 8 kg vertical lift, ensuring the fixed NBR bumper absorbs the final impact energy.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 35-65 mm window. Confirm the 65 mm maximum stroke, 30 mm adjustment range, M5x0.8 port, built-in magnet, and female M4x0.7 rod thread. Remember that a plain cylinder does not hold its load on air loss or valve centring; for a held load, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The M6x1.0 R screw shortens the extend stop by up to 30 mm, yielding a usable 35-65 mm range; retract remains full. The built-in -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.