
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-75B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 70 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X70-75B is a compact double-acting cylinder featuring an external M6x1.0 adjuster screw that dials the extend stop from 0 up to 70 mm directly on your machine. The short riveted body minimizes axial mounting depth where round-body or profile cylinders cannot fit.
This specific SKU includes a male M6x1.0 piston rod thread (option B) and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-travel deceleration relies on a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X70-75B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 70 mm |
| Adjustable range | 0 – 70 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×70 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the M6 adjuster to find the exact 0-70 mm extend point for prototype tooling before locking the stop, avoiding custom part fabrication during R&D.
Fit the short riveted body into tight machine cells and set the precise extend stop for pressing inserts, relying on the fixed NBR bumper for end shock.
Choose this 20 mm bore when you need on-site extend tuning between 0 and 70 mm without swapping shims or parts.
Confirm your requirements for the 75 mm adjustment window, M5x0.8 air port, and the male M6x1.0 rod thread. Note that a plain SDAJ cannot hold a load if air pressure drops or the valve centers; the piston will drift. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The M6x1.0 adjuster screw shortens the extend stroke by up to 75 mm, allowing usable extend positions from 0 to 70 mm. This unit includes a male M6x1.0 piston rod thread, and because it lacks the -S magnet, it cannot accept position switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.