
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-20S is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 55 to 75 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X75-20S is a compact double-acting cylinder featuring an external R (M6x1.0) adjustment screw that lets you dial the extend stop anywhere between 55 and 75 mm directly on the machine. The short riveted body minimizes axial mounting depth, making it ideal for tight machinery envelopes.
A fixed NBR bumper handles end-of-stroke deceleration, while the included -S piston magnet supports AirTAC reed or electronic solid-state switches for position sensing. Operating pressure spans 0.15 to 1.0 MPa, and the bore-fixed M5x0.8 port ensures straightforward pneumatic integration.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X75-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 75 mm |
| Adjustable range | 55 – 75 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the mechanical stop on carton folding arms to accommodate different box sizes, relying on the fixed NBR bumper to absorb the end shock.
Use the M6x1.0 adjuster screw to find the exact 8 kg vertical lift position during R&D setups before locking down the final machine sequence.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 20 mm window.
Confirm your parameters: 20 mm bore, 75 mm max stroke, 20 mm adjustability window, M5x0.8 port, built-in magnet (S), and a female M4x0.7 rod-end thread. Remember that a plain cylinder does not hold a load if air pressure drops or the valve centers—the piston will drift. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
At 0.7 MPa, push increases to 219.9 N and pull to 184.7 N. The theoretical maximum push is 32 kgf at 1.0 MPa.
The R (M6x1.0) screw mechanically shortens the extend stroke by up to 20 mm, allowing usable end positions between 55 and 75 mm without changing parts. The -S suffix denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches for precise end-position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.