
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-100 is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 0 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-100 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M6x1.0) screw, you shorten the outward stroke on-site across a 0 to 80 mm window without swapping shims or parts. Retract remains full length.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is handled by a fixed NBR bumper, which decelerates the piston near the extremes but is not an adjustable air cushion. Note this SKU lacks a piston magnet, so it cannot accept reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-100 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 0 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 100 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -100 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly readjust the mechanical stop for different product lengths on a packaging line, relying on the fixed NBR bumper to absorb end shock.
Choose this unit when your fixture requires exact on-machine stroke tuning between 0 and 80 mm.
Confirm the 20 mm bore, 80 mm maximum stroke, 100 mm adjust window, and M5x0.8 port. Because this configuration has no -S magnet, position sensing is unavailable unless you specify the -S variant. A plain cylinder does not hold a load on air loss or valve centring; the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
This 20 mm bore double-acting cylinder pushes 157.1 N and pulls 131.9 N at 0.5 MPa. At 0.7 MPa it pushes 219.9 N. The theoretical maximum push is 32 kgf at 1.0 MPa. The air port is M5x0.8.
Turning the R (M6x1.0) screw shortens the extend stop by up to 100 mm, giving a usable extend range of 0 to 80 mm while retract stays full. This specific SKU has no piston magnet, so it cannot take a magnetic switch; you must select the -S variant for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.