
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 30 to 80 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X80-50B is a double-acting compact cylinder featuring an external adjustable extend stop. An M6x1.0 adjuster screw lets you dial the forward end-position anywhere between 30 and 80 mm directly on your machine, eliminating the need for shims or part swaps. Retract remains at the full 80 mm.
This unit includes a male-thread M6x1.0 piston rod and operates via an M5x0.8 port. The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. End shock is managed by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Note that this SKU lacks a piston magnet, so it cannot host reed or electronic switches.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X80-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 80 mm |
| Adjustable range | 30 – 80 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×80 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Set precise extend endpoints during prototype testing, tweaking the mechanical stop on the fly until the optimal 30 to 80 mm displacement is found before locking the screw.
When sizing this 20 mm bore, check both neighbours.
Choose this specific model if your fixture requires frequent on-site stroke tuning across a 30 to 80 mm window. Confirm your bore, 80 mm maximum stroke, 50 mm adjustability, M5x0.8 port, and male M6 rod thread. Remember that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the fixed bumper only decelerates near the end. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
This 20 mm bore cylinder pushes 157.1 N and pulls 131.9 N at 0.5 MPa, pushes 219.9 N at 0.7 MPa, and has a theoretical maximum push of 32 kgf at 1.0 MPa. The air port is M5x0.8.
The external M6x1.0 screw shortens the extend stroke by up to 50 mm, giving a usable forward range of 30 to 80 mm; retract stays at the full 80 mm. This specific SKU has no piston magnet, so it cannot take magnetic switches—the -S variant is required for reed or electronic sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.