
The AirTAC SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50B is a genuine double-acting COMPACT cylinder (Ø20mm bore) whose extend end-position is set by an external M6×1.0 adjustment screw. You can dial the stroke anywhere from 35 to 85 mm on the machine — no shims, no part change.
The AirTAC SDAJ20X85-50B is a compact double-acting double-rod cylinder built for on-machine extend positioning. An external M6x1.0 adjuster screw lets you dial the forward stop anywhere between 35 and 85 mm without changing parts.
The short riveted body drastically reduces axial mounting depth where round-body or profile cylinders will not fit. This specific SKU features a male M6x1.0 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ12~25 Adjustable Ultra-Thin Cylinder SDAJ20X85-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø20 mm |
| Max stroke | 85 mm |
| Adjustable range | 35 – 85 mm |
| Adjuster thread (R) | M6×1.0 |
| Port size | M5×0.8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M4×0.7 F / M6×1.0 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | — |
| Max (@1.0 MPa) | 27 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 20 | Bore size in mm. |
| ×85 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 35 to 85 mm extend stop during initial tooling setup without machining custom spacers.
Quickly re-tune the extend length on packaging lines when switching between different product sizes.
When sizing this 20 mm bore actuator, evaluate your force margins both ways. Choose this specific model when your setup requires frequent trial positioning or changeover within the 35 to 85 mm window.
Remember that a plain pneumatic cylinder does not hold its load if air pressure drops or the valve centers; the piston will drift. The fixed NBR bumper only decelerates the stroke near its end and the R screw acts as a mechanical stop, neither functions as a lock. For suspended or vertical loads, integrate an external rod lock or pilot-operated check valve. Confirm your requirements for the 85 mm maximum stroke, 50 mm window, M5x0.8 port, and the male M6x1.0 rod thread specified by the -B option.
AirtacDistr lists every SDAJ20 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj20-adjustable-cylinder
Quick checklist
The theoretical maximum push is 32 kgf at 1.0 MPa.
The external M6x1.0 screw shortens the extend stop by up to 50 mm, allowing on-machine tuning from 35 to 85 mm. This SKU has no magnet and cannot take switches; ordering the -S variant adds a piston magnet for AirTAC reed or electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.