
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X10-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 0 to 10 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X10-10SB is a compact double-acting double-rod cylinder featuring an on-site extend stop. Turning the external M10x1.25 adjuster screw lets you dial the outward stroke down from 10 mm to 0 mm without changing parts.
The short riveted body saves axial mounting depth where round-body or profile cylinders will not fit. This unit includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod thread. End shock is absorbed by a fixed NBR bumper, which decelerates the stroke end but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X10-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 10 mm |
| Adjustable range | 0 – 10 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Turn the M10x1.25 adjuster screw on the machine to set new sensor positions during product changeovers, avoiding the need to swap shims or cylinders.
Use the male M10x1.25 rod end and the 0-10 mm window to trial different engagement depths on a test rig, finding the exact contact point before locking the stop.
Choose this adjustable-stop version if your fixture requires frequent changeovers or trial positioning. Confirm your parameters: 32 mm bore, 10 mm maximum stroke, 10 mm adjust window, PT1/8 port, male M10x1.25 rod thread, and a magnetic piston. Note that a plain cylinder does not hold its load on air loss or valve centering—the piston drifts and the fixed bumper only decelerates near the end. For a held load, specify an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The external M10x1.25 screw shortens the extend stop from 10 mm down to 0 mm without changing the force output. The included -S magnet works with AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.