
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-10SB is a compact double-acting double-rod cylinder featuring an external extend stop. An M10x1.25 adjuster screw lets you dial the extend position on-site between 100 and 110 mm without changing parts.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 rod end. The short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 100 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 100 to 110 mm during fixture swaps to align clamps perfectly without machining new spacers.
Use the male M10x1.25 rod and 10 mm adjustment window to probe optimal contact points before locking down a final mechanical stop.
Choose this unit if your fixture requires precise 100-110 mm extend tuning during changeovers.
Confirm the 110 mm maximum stroke, 10 mm window, PT1/8 port, male M10x1.25 rod thread, and the integrated magnet. Note that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper only decelerates near the end and the R screw is a mechanical stop, not a lock. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the M10x1.25 R screw shortens the extend stop within the 100-110 mm range. The built-in magnet (-S) operates with AirTAC reed or electronic solid-state switches to confirm end-of-stroke position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.