
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-20S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the M10x1.25 adjuster screw, you can dial the extend position down from the maximum 110 mm to 90 mm directly on the machine, providing a 20 mm tuning window without changing parts.
This variant includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches. The short riveted body conserves axial mounting depth in tight fixtures. End-of-travel deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Operating speed ranges from 30 to 500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 90 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the M10x1.25 screw on-site to accommodate varying box depths, ensuring precise flap positioning during rapid 30-500 mm/s cycling.
Set exact insertion depths for bearing presses within the 20 mm window, relying on the fixed NBR bumper to absorb the end shock.
Choose the SDAJ32X110-20S if your fixture requires on-site stroke tuning across a 90 to 110 mm window.
Confirm the 32 mm bore, 110 mm maximum stroke, 20 mm adjustability, PT1/8 port, and female M6x1.0 rod-end thread suit your mounting needs. The -S magnet enables switch sensing, but note that a plain cylinder does not hold position on air loss; add an external rod lock or pilot-operated check valve for load holding.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external R (M10x1.25) screw shortens the extend stroke by up to 20 mm, yielding a usable 90 to 110 mm range. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.