
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-50S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 60 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-50S is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw. This mechanism lets you dial the extend stop directly on your machine anywhere between 60 and 110 mm, eliminating the need for shims or part swaps during setup. Retract travel remains full length.
The short riveted body minimizes axial mounting depth, and a fixed NBR bumper decelerates the end of travel. Equipped with a built-in magnet, this unit supports AirTAC reed or electronic solid-state switches for precise position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 60 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 60 to 110 mm on the fly to accommodate varying part heights during production line changeovers without swapping hardware.
Use the M10x1.25 adjuster to find the exact 241 N safe working extension for prototype brackets before locking down the final mechanical stop.
When sizing this actuator, evaluate your force needs bidirectionally. Stepping up, the SDAJ40 offers 628.3 N if your payload demands more thrust.
This specific configuration includes a female M6x1.0 rod-end thread, a PT1/8 air port, and the -S magnet option for sensing. It is built for applications requiring frequent on-site stroke tuning. Remember that a standard cylinder cannot hold a load if air pressure drops or the valve centers; the bumper only decelerates near the end of the stroke. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The -S option adds a piston magnet for AirTAC reed or electronic switches, while a fixed NBR bumper handles end deceleration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.