
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-75S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the M10x1.25 adjuster screw lets you dial the extend position anywhere between 35 and 110 mm directly on your machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where a round-body or profile cylinder will not fit. End shock is managed by a fixed NBR bumper that decelerates the stroke end, which is not an adjustable air cushion. This unit includes a built-in piston magnet for AirTAC reed or electronic switches, operating at speeds of 30-500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 35 to 110 mm during product family changeovers to position forming tools precisely without machining replacement spacers.
Fine-tune the 32 mm bore actuator in test rigs to find the optimal engagement point, locking the M10x1.25 screw once the ideal 241 N working load is achieved.
Choose this model if your fixture requires frequent on-machine stroke tuning across a 35 to 110 mm window.
Confirm your bore, 110 mm max stroke, 75 mm adjust window, and PT1/8 port. The -S code denotes the internal magnet for sensing, and the rod end features a female M6x1.0 thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centred; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend stop by up to 75 mm, giving a usable range of 35 to 110 mm. The -S code means a built-in piston magnet is included for AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.