
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 35 to 110 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X110-75SB is a compact double-acting double-rod cylinder featuring an external extend stop. By turning the R (M10x1.25) adjuster screw, you can dial the forward stroke down by up to 75 mm directly on the machine, yielding a usable extend range of 35 to 110 mm without swapping shims or parts. Retract remains full length.
This variant includes a built-in piston magnet (-S) for AirTAC reed or electronic switches and a male-thread piston rod (-B, M10x1.25) for secure tooling attachment. The short riveted body saves axial mounting depth where space is tight. End shock is handled by a fixed NBR bumper that decelerates the stroke end; it is not an adjustable air cushion. Operating speed spans 30-500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X110-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 110 mm |
| Adjustable range | 35 – 110 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Fine-tune the 35-110 mm extend stop on a bearing press to hit exact insertion depths without machining new spacers.
Adapt a 32 mm bore actuator to multiple product lengths by twisting the R screw, saving axial depth in tight cells.
Choose this specific unit when your fixture requires on-site stroke tuning to perfect a gripping or pressing position. Confirm your parameters: 32 mm bore, 110 mm max stroke, 75 mm window, PT1/8 port, -S magnet, and -B male M10x1.25 rod.
Remember that a plain cylinder does not hold its load if air is lost or the valve centers; the piston will drift. The fixed NBR bumper only decelerates near the end of travel and the R screw is a mechanical stop, neither acts as a lock or brake. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend end position from the 110 mm maximum down to 35 mm. The built-in -S magnet allows tracking via AirTAC reed or electronic solid-state switches in the body grooves.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.