
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-20S is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop from 100 to 120 mm. The short riveted body saves axial mounting depth where a larger profile cylinder will not fit.
This unit includes a built-in piston magnet (-S) for direct mounting of AirTAC reed or electronic solid-state switches along the body grooves. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Operating speed spans 30-500 mm/s across a 0.15 to 1.0 MPa pressure range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 100 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop between 100 and 120 mm to match varied jig heights during product family changeovers, avoiding the need to machine custom spacers.
Use the 20 mm adjustment window to test multiple extend endpoints during R&D trials, locking in the exact 100-120 mm displacement once the optimal position is found.
Choose this specific model if your fixture requires frequent on-machine stroke tuning during setup or changeovers without part swaps.
Confirm your parameters: 32 mm bore, 120 mm maximum stroke, 20 mm adjust window, PT1/8 port, female M6x1.0 rod-end thread, and the -S magnet option. Note that a plain cylinder does not hold a load if air pressure drops or the valve centres; the fixed bumper only decelerates near the end of travel. For secure load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external M10x1.25 screw shortens the extend endpoint by up to 20 mm, giving a usable range of 100 to 120 mm. The included -S magnet allows tracking via AirTAC reed or electronic switches; the adjuster is a mechanical stop, not a mid-stroke lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.