
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-30S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-30S is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw. This mechanism lets you dial the extend stop down from the 120mm maximum to anywhere in the 90-120mm window directly at the machine, eliminating the need for shims or part swaps during changeovers.
Built with a short riveted body, this unit saves valuable axial mounting depth where round-body or profile cylinders cannot fit. It includes a built-in piston magnet (-S) for AirTAC reed or electronic switches, operating at speeds between 30-500mm/s. End-of-travel shock is managed solely by a fixed NBR bumper, which decelerates the piston but is not an adjustable air cushion or a locking brake.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 90 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the mechanical stop on the fly to push cartons of different depths into specific packing lanes, relying on the fixed NBR bumper to absorb the 30-500mm/s impact.
Leverage the built-in magnet with an electronic switch to confirm probe extension, fine-tuning the 90-120mm reach to test multiple product heights without changing hardware.
This model is ideal for operators who require frequent on-site stroke tuning to accommodate varying material thicknesses.
Verify your requirements for the 32mm bore, 120mm maximum stroke, 30mm adjustment window, PT1/8 port, and the built-in magnet for electronic or reed sensing. Note that a plain cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The adjustment screw does not alter these force values.
The M10x1.25 adjuster screw mechanically shortens the extend stroke within the 90-120mm range. The built-in -S magnet works with AirTAC reed or electronic solid-state switches mounted in the body grooves for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.