
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-40S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-40S is a compact double-acting double-rod cylinder featuring an external R (M10x1.25) adjuster screw. This mechanism lets you dial the extend stop down from the 120 mm maximum to any point between 80 and 120 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. Retract remains a full 120 mm stroke. The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit.
The unit includes a fixed NBR bumper at each end to decelerate the stroke end, which is not an adjustable air cushion. Equipped with a built-in piston magnet (-S), it supports AirTAC reed or electronic switches for position sensing.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 80 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 120 mm via the M10x1.25 screw during prototype runs to find the exact 241 N safe working contact point without machining new spacers.
Set precise descent limits for light 20.5 kg vertical lift fixtures, using the mechanical stop to establish height rather than relying on valve timing.
Choose this specific model if your fixture requires frequent on-site stroke tuning within the 80 to 120 mm window.
Confirm your parameters: 32 mm bore, 120 mm max stroke, 40 mm adjust window, PT1/8 port, female M6x1.0 rod-end thread, and the -S magnet for sensing. Note that a plain cylinder does not hold its load on air loss or when the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For a held load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and speed ranges from 30-500 mm/s.
Turning the external R (M10x1.25) screw shortens the extend stroke by up to 40 mm, allowing usable end positions between 80 and 120 mm; it acts strictly as a mechanical stop and does not alter force. The -S code indicates a built-in piston magnet designed to trigger AirTAC reed or electronic switches for position confirmation.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.