
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-50 is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-50 is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. An M10x1.25 adjuster screw lets you dial the forward end-position anywhere between 70 and 120 mm directly on the machine, eliminating the need for shims or part swaps.
The short riveted body saves valuable axial mounting depth where a longer profile cylinder will not fit. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. This specific SKU lacks a piston magnet, so it cannot support reed or electronic switches without upgrading to the -S variant.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-50 |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 70 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 70 to 120 mm during fixture swaps to accommodate varying part depths without machining new spacers.
Sweep the 50 mm adjustment window to test multiple engagement points on an R&D rig, finding the exact contact distance before locking the screw.
When sizing this 32 mm bore, evaluate your force needs carefully. Confirm your required 70-120 mm adjust window, PT1/8 port, female M6x1.0 rod thread, and lack of magnet.
Remember that a plain SDAJ does not hold position or load when air is lost or the valve is centred. The fixed NBR bumper only decelerates the stroke end, and the M10x1.25 screw acts as a mechanical stop, not a lock. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
Turning the M10x1.25 external screw shortens the extend end-position by up to 50 mm, giving a usable forward range of 70 to 120 mm. This SKU has no piston magnet, so it cannot accept reed or electronic switches unless upgraded to the -S option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.