
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-50B is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 70 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-50B is a compact double-acting double-rod cylinder featuring an external extend stop. A simple turn of the R (M10x1.25) adjuster screw lets you dial the forward stroke down on-site anywhere from 70 to 120 mm, completely eliminating the need for shims or part swaps during commissioning.
Designed to conserve axial mounting depth, the short riveted body fits easily into tight machine frames where round-body alternatives fail. This specific SKU includes a male M10x1.25 piston rod thread and lacks a piston magnet, meaning it cannot host reed or electronic switches without switching to the -S variant. End-of-travel deceleration is handled strictly by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-50B |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 70 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 70 to 120 mm clamping reach on machining fixtures using the R screw, ensuring varied part heights are held securely without fabricating custom spacers.
Fine-tune the pressing stroke during format changeovers to prevent crushing delicate boxes, letting the fixed NBR bumper absorb the end-of-stroke impact safely.
When sizing this unit, evaluate your thrust requirements against its neighbours. Choose this 32 mm bore if your changeover-heavy equipment requires precise on-machine extend tuning within that 70-120 mm window.
Confirm your build needs the male M10x1.25 rod thread (indicated by the -B code) and the PT1/8 air port. Remember that a plain SDAJ will not hold a load if air pressure drops or the valve is centred; the piston drifts, and the fixed bumper only decelerates near the end of travel. For suspended or vertical loads that must remain locked without live pressure, integrate an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The external M10x1.25 adjuster screw mechanically shortens the extend stroke by up to 50 mm, allowing you to set the forward stop anywhere between 70 and 120 mm without changing parts. This specific -B model lacks a piston magnet, so it cannot accept reed or electronic switches; you must select an -S variant for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.