
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-75SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 45 to 120 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X120-75SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet (-S) and a male-thread piston rod M10x1.25 (-B) come standard. By turning the R (M10x1.25) adjuster screw, you shorten the extend end-position on-site across a 45 to 120 mm window without swapping parts.
The short riveted body saves axial mounting depth where a round-body or profile cylinder will not fit. End-of-stroke energy is managed by a fixed NBR bumper that decelerates the piston, though it is not an adjustable air cushion. Operating pressure spans 0.15 to 1.0 MPa, with a speed range of 30-500 mm/s.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X120-75SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 120 mm |
| Adjustable range | 45 – 120 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 75 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×120 | Maximum stroke length in mm. |
| -75 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the mechanical stop via the R M10x1.25 screw when switching box sizes on a packing line, avoiding part changes during product changeover.
Use the 75 mm adjustment window to step a sensor array into exact contact distance, finding the optimal inspection point before locking the male rod down.
This SDAJ32X120-75SB configuration is ideal for operators needing frequent on-machine stroke tuning across a 75 mm window.
Confirm your requirements for the PT1/8 port, the 120 mm maximum stroke, and the male M10x1.25 rod thread. Note that a plain cylinder does not hold its load on air loss or when the valve is centred—the piston drifts and the bumper only decelerates near the stroke end. For a held load without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw shortens the extend stop by up to 75 mm, yielding a usable extend range of 45 to 120 mm. The included -S magnet enables position sensing using AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.