
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 100 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-30S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the outward stroke down from 130 mm to 100 mm directly on the machine, eliminating the need for shims or part swaps during setup.
This 32 mm bore unit carries a built-in piston magnet (-S) for AirTAC reed or electronic switches and uses a PT1/8 port. The short riveted body saves axial mounting depth where larger profile cylinders cannot fit. End-of-stroke deceleration relies on a fixed NBR bumper, which is not an adjustable air cushion. Note that this 130 mm stroke exceeds the 120 mm standard maximum for this bore family, making it a non-standard length.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-30S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 100 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Adjust the stroke on-site to handle different carton widths on a packing line, using the built-in magnet to confirm the extended position before firing the diverter.
Stepping down to an SDAJ25 yields 245.4 N, whereas stepping up to an SDAJ40 provides 628.3 N.
This specific model is ideal for operators who require frequent on-site stroke tuning between 100 mm and 130 mm during changeovers. Confirm your port is PT1/8 and that the female M6x1.0 rod-end thread suits your mounting requirement. A plain cylinder does not hold a load when air is lost or the valve is centered; the piston drifts and the fixed bumper only decelerates near the end. For load holding without live pressure, install an external rod lock or a pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
The external R (M10x1.25) screw shortens the extend stroke by up to 30 mm, allowing usable outward travel between 100 mm and 130 mm. The -S suffix indicates a built-in piston magnet for direct mounting of AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.