
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-40S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 90 to 130 mm on the machine — no shims, no part change.
The SDAJ32X130-40S is a compact double-acting double-rod cylinder featuring an external M10x1.25 adjuster screw that dials the extend stop directly on your machine. You can tune the forward stroke anywhere between 90 and 130 mm without swapping shims or parts.
Its short riveted body saves valuable axial mounting depth where larger profile cylinders cannot fit. The built-in piston magnet supports AirTAC reed or electronic switches for position sensing, while a fixed NBR bumper decelerates the stroke ends. Note that this 130 mm length exceeds the 120 mm standard stroke catalog maximum for this bore, making it a non-standard configuration.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-40S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 90 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 40 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -40 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Accommodate fluctuating package heights on the fly by turning the M10x1.25 adjuster screw, ensuring consistent sealing pressure across diverse box profiles.
Perfect for prototype assembly lines where the final extend stop requires iterative fine-tuning before finalizing the mechanical layout.
When sizing this unit, verify if the 32 mm bore provides the optimal thrust.
This model is specified with a 130 mm maximum stroke, a 40 mm adjustment window, a PT1/8 port, a female M6x1.0 rod-end thread, and a built-in magnet (-S). If your application requires holding a load during air loss or valve centering, be aware the fixed bumper only decelerates near the end of travel and the adjuster acts as a mechanical stop, not a lock. You must integrate an external rod lock or pilot-operated check valve for secure load holding.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
At 0.7 MPa the push is 563 N and the pull is 483.8 N. The theoretical maximum push is 82 kgf at 1.0 MPa.
The external R (M10x1.25) screw shortens the extend stroke by up to 40 mm, allowing usable forward travel between 90 and 130 mm. The included -S piston magnet enables tracking by AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.