
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-50S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 80 to 130 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X130-50S is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. A built-in piston magnet enables position sensing with AirTAC reed or electronic switches. The R (M10x1.25) screw lets you dial the extend position anywhere between 80 and 130 mm directly on the machine, eliminating the need for shims or part swaps during changeovers.
The short riveted body conserves axial mounting depth where space is tight. End-of-stroke deceleration is handled by a fixed NBR bumper, which is not an adjustable air cushion. Note that exceeding the 120 mm standard stroke list makes this a nonstandard configuration.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X130-50S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 130 mm |
| Adjustable range | 80 – 130 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 50 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Maximum stroke length in mm. |
| -50 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 80 to 130 mm via the M10x1.25 screw to accommodate different part heights on a machining line without swapping cylinders.
Use the integrated magnet with an electronic switch to verify the adjusted extend position during prototype assembly before locking down the final stroke.
Choose this specific unit if your fixture requires on-site stroke tuning across a 50 mm window.
Confirm your parameters: 32 mm bore, 130 mm maximum stroke, 50 mm adjustability, PT1/8 port, and a female M6x1.0 rod-end thread. The -S code indicates the integrated magnet for sensing. Remember that a plain cylinder drifts when air is lost or the valve is centered; the fixed bumper and mechanical stop do not lock the load. For secure holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push force is 82 kgf at 1.0 MPa.
Turning the external R (M10x1.25) screw shortens the extend stroke by up to 50 mm, giving a usable range of 80 to 130 mm. The -S suffix means a built-in magnet is present for use with AirTAC reed or electronic switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.