
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X140-20S is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 120 to 140 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X140-20S is a compact double-acting double-rod cylinder built with a space-saving riveted body that minimizes axial mounting depth. A 140mm extend stroke exceeds the 130mm standard maximum for this 32mm bore, making it a non-standard, made-to-order item. It features an external M10x1.25 R-thread adjuster screw, letting you dial the extend stop down to 120mm directly on the machine without swapping shims or parts.
The unit includes a built-in piston magnet for AirTAC reed or electronic switches and relies on a fixed NBR bumper at each end to decelerate the stroke. This bumper is not an adjustable air cushion, and the mechanism is not a mid-stroke lock.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X140-20S |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 140 mm |
| Adjustable range | 120 – 140 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 20 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -20 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial the extend stop from 120 to 140mm during prototype tooling changes to find the exact clamping depth without machining new spacers.
When sizing this unit, verify your space constraints and force requirements bidirectionally.
This model is ideal for setups requiring frequent on-site stroke tuning between 120mm and 140mm. Remember that a plain cylinder does not hold its load on air loss or when a valve is centered; the piston drifts. For load holding without live pressure, integrate an external rod lock or a pilot-operated check valve. Confirm your bore, 140mm stroke, 20mm window, PT1/8 port, female M6x1.0 rod thread, and the installed magnet before ordering.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82kgf at 1.0MPa.
The M10x1.25 R-thread screw mechanically shortens the extend stroke from the 140mm maximum down to 120mm without changing the force. The included -S magnet works with AirTAC reed or electronic switches for position sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.