
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X140-30SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 110 to 140 mm on the machine — no shims, no part change.
The SDAJ32X140-30SB is a double-acting, double-rod compact cylinder featuring a 32mm bore and a 140mm stroke. Because this stroke exceeds the 130mm standard maximum for this bore size, the unit is produced as a non-standard, made-to-order item. An external M10x1.25 adjustment screw lets you dial the extend stop down by 30mm, yielding a usable extension range of 110 to 140mm directly on the machine without swapping shims or components.
This variant includes a built-in piston magnet for AirTAC reed or electronic switches and a male M10x1.25 piston rod. The short riveted body saves axial mounting depth where round-body alternatives will not fit, and end shock is managed by a fixed NBR bumper rather than an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X140-30SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 140 mm |
| Adjustable range | 110 – 140 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 30 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Maximum stroke length in mm. |
| -30 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the 110-140mm extend stop on dedicated machining fixtures to accommodate multiple part lengths without fabricating new mechanical spacers.
Set precise vertical lowering limits for a lifting platform, relying on the male M10x1.25 rod to secure attachments while adjusting the end position on-site.
When sizing this actuator, evaluate both neighbouring bores. Choose this specific model if your fixture requires on-site stroke tuning between 110 and 140mm, a male M10x1.25 rod end, and switch sensing.
Confirm the 32mm bore, 140mm stroke, 30mm adjust window, PT1/8 port, and the -S/-B options match your schematic. Remember that a plain cylinder does not hold its load if air pressure drops or the valve centres; the piston drifts. For load holding without live pressure, install an external rod lock or a pilot-operated check valve, as the fixed NBR bumper only decelerates near the end of travel and acts as a mechanical stop, never a brake.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The M10x1.25 screw shortens the extend stroke by up to 30mm, allowing you to set the stop anywhere between 110mm and 140mm. The -S code denotes a built-in piston magnet compatible with AirTAC reed or electronic solid-state switches.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.