
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10H is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-10H is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. Turning the R (M10x1.25) screw lets you dial the extend position anywhere between 5 and 15 mm directly on the machine, eliminating the need for shims or part swaps.
This variant uses fluororubber (FKM) seals for enhanced thermal and oil resistance. The short riveted body drastically reduces axial mounting depth where a larger profile cylinder would never fit. End-of-travel deceleration is handled by a fixed NBR bumper, not an adjustable air cushion, and the unit operates across a 30-500 mm/s speed range.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10H |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Dial in the exact 5-15 mm extend stop during initial tooling setup to precisely strike a part without crushing it.
Leverage the FKM seals to clamp components reliably in elevated temperature zones where standard rubber degrades.
Utilize the short riveted body to fit a 402.1 N ejection stroke into a tight machinery cavity with minimal axial footprint.
When sizing this 32 mm bore actuator, evaluate your force requirements bidirectionally.
Choose this specific SKU when your fixture requires exact on-site extend tuning within the 5-15 mm window. Note that this base configuration lacks a piston magnet (-S) and therefore cannot support reed or electronic switches. Confirm your requirements for the PT1/8 port, female M6x1.0 rod thread, and the FKM seal option. Remember that the fixed bumper only decelerates the stroke end; for load holding without live pressure, install an external rod lock or pilot-operated check valve.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa.
The R (M10x1.25) screw mechanically limits the extend stroke, allowing you to set the end position anywhere from 5 mm up to the full 15 mm. This adjustment changes the stop position only; it does not alter force or lock the piston mid-stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.