
The AirTAC SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10SB is a genuine double-acting COMPACT cylinder (Ø32mm bore) whose extend end-position is set by an external M10×1.25 adjustment screw. You can dial the stroke anywhere from 5 to 15 mm on the machine — no shims, no part change.
The AirTAC SDAJ32X15-10SB is a compact double-acting double-rod cylinder featuring an external adjustable extend stop. By turning the R (M10x1.25) screw, you can dial the forward stroke down from its 15 mm maximum to as little as 5 mm directly on the machine, eliminating the need for shims or part swaps during changeovers. The short riveted body saves valuable axial mounting depth where a larger profile cylinder will not fit.
This specific configuration includes a built-in piston magnet for AirTAC reed or electronic switches and a male-thread M10x1.25 piston rod end. End-of-travel deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion.
| Model | Airtac SDAJ32~40 Adjustable Super Slim Cylinder SDAJ32X15-10SB |
|---|---|
| Series | SDAJ compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Max stroke | 15 mm |
| Adjustable range | 5 – 15 mm |
| Adjuster thread (R) | M10×1.25 |
| Port size | PT1/8 |
| Acting type | Double acting |
|---|---|
| Rod end thread | M6×1.0 F / M10×1.25 male (B) |
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
The adjustment screw shortens the extend stroke by up to 10 mm. SDAJ is a double-rod cylinder. Specifications follow the official AirTAC SDAJ datasheet.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
SDAJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod SDA push of the same bore. Actual usable force is lower than theoretical due to friction.
| SDAJ | Compact double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Maximum stroke length in mm. |
| -10 | Adjustable window (10/20/30/40/50/75/100 mm). |
| S / B | S = magnet; B = male-thread rod (both optional). |
Thread: PT standard. Related SDA-family variants: SDA (fixed stroke), SDAD (double rod), SSA/STA (single acting), SDAT (duplex), SDAW (duplex-end).
Quickly reposition the male M10x1.25 rod end for varying product heights on a packaging line by turning the external adjuster screw instead of swapping hardware.
Use the built-in magnet with an electronic switch to verify exact insertion depth during prototype assembly, fine-tuning the 10 mm window until the stroke is perfect.
When sizing this 32 mm bore actuator, evaluate your force requirements against its neighbors. Choose this model if your fixture requires precise on-site stroke tuning between 5 and 15 mm, a male M10x1.25 rod thread, and position sensing via the integrated magnet.
Confirm your port size is PT1/8 and that the 10 mm adjustment window covers your positioning variance. Note that a plain cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift, and the fixed bumper only decelerates near the end of travel. For load holding without live pressure, you must integrate an external rod lock or a pilot-operated check valve into your circuit.
AirtacDistr lists every SDAJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sdaj32-adjustable-cylinder
Quick checklist
The theoretical maximum push is 82 kgf at 1.0 MPa. It operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s.
The R (M10x1.25) screw mechanically shortens the extend end-position by up to 10 mm, giving a usable forward range of 5 to 15 mm; it does not alter the force. The included -S magnet is compatible with standard AirTAC reed or electronic solid-state switches for position detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.